



HL-05-ATWL-LS
光学影像、涡电流探伤组合筛选机
Combined screening machine of optical image and vortex current flaw detection
裂纹检测精度:深度>0.1mm 宽度0.06mm
Crack detection accuracy: depth>0.1mm width 0.06mm
参数规格
Specifications
本机台外观尺寸(长*宽*高):
约2000mm*1200mm*2300mm
机台重量:约850KG
更换规格:约30分钟
检测范围:
长度:10-60mm 直径:10-30mm
速度最快可达20支/分钟
裂纹检测精度:深度>0.1mm 宽度0.06mm
电源:交流单项220V 50HZ
功率:约3KW
Product Size(L x W x H):
About 2000mm*1200mm*2300mm
Machine weight: about 850KG
Replacement specifications: about 30 min
examination range:
Length: 10-60mm Diameter: 10-30mm
The fastest speed:20 pcs / min
Crack detection accuracy: depth >0.1mm width 0.06mm
Power: AC single 220V 50HZ
Power: about 3KW
可检测项目
Suitable for
表面划伤、淬火开裂检测(涡流检测)
○螺纹直径公差检测;○最大/最小对边公差检测;
○螺纹牙底径检测;○螺纹牙中径检测;○牙距检测;
○有无螺纹检测;○斜牙检测;○粗细牙检测;
○头部有无电镀检测;○头部真圆度测量;○内孔直径公差;
○搓牙有无到位检测;○各部位台阶公差检测;
○头部厚度公差检测;○总长度公差检测;○侧面开裂检测;
Surface scratch and quenching cracking detection (Eddy current detection)
○Thread diameter tolerance detection;○ Maximum / minimum alignment tolerance detection;
○Threaded teeth bottom diameter detection;○ Thread middle diameter detection; Distance detection between teeth;
○Thread or not; ○Oblique teeth detection; ○Teeth thickness detection;
○Electroplating on head or not;○ Head roundness measurement; ○Diameter tolerance of inner hole;
○Detection for rub teeth in place or not;○ Step tolerance detection of each part;
○Head thickness tolerance detection;
○ Total length tolerance detection; Side cracking detection;
本设备用于检测高端螺栓外观尺寸、涡流表面探伤组合筛选机。
本机采用德国原装进口Ibg涡流主机
This equipment is used to detect the appearance size of high-end bolt, vortex surface flaw detection combination screening machine.
This machine adopts imported Ibg eddy current main engine from Germany.