

HL-XG360-LS100
分度盘悬挂式螺丝光学筛选机
Optical screening machine for hanging screw on dividing plate
外螺纹360度牙伤检测
Thread 360 degree thread injury detection
参数规格
Specifications
本机台外观尺寸(长*宽*高):
约1200mm*1200mm*2300mm
机台重量:约650KG
更换规格:约15分钟
检测范围:
长度:10-100mm 直径:3-12mm
速度最快可达400支/分钟
可装8支CCD
电源:交流单项220V 50HZ
功率:约3KW
运转方式:连续运转方式
Product Size(L x W x H):
About 1200mm*1200mm*2300mm
Machine weight: about 650KG
Replacement specification: about 15 min
examination range:
Length: 10-100mm Diameter: 3-12mm
The fastest speed:400 pcs / min
Can carry 8 CCD
Power: AC single 220V 50HZ
Power: about 3KW
Mode of operation: mode of continuous operation
可检测项目
Suitable for
○螺纹直径公差检测;○头部最大/最小对边公差检测;
○螺纹牙底径检测;○最大/最小对角公差检测;
○螺纹牙中径检测;○内孔与外圆同心度检测;
○牙距检测;○内孔径有无毛刺检测;○有无螺纹检测;
○头部有无电镀检测;○斜牙检测;
○头部表面开裂(有油件、黑色、侧面;开裂除外)
○粗细牙检测;○内孔直径公差;○尾端尖锐度检测;
○有无焊点及焊点数检测;○头部真圆度测量;
○焊点面积检测;○各部位台阶公差检测;○梅花形状检测;
○头部厚度公差检测;○有无牙检测;○牙部长度公差检测;
○针孔堵塞检测;○有无十字针孔;
○Thread diameter tolerance detection;○ Maximum / minimum alignment tolerance detection on head;
○Threaded teeth bottom diameter detection; ○Maximum/minimum diagonal tolerance detection;○Thread middle diameter detection; ○Concentricity detection of inner hole and outer circle;
○Thread or not;○Distance detection between teeth; ○Detection for burr in internal aperture or not;○Electroplating on head or not; ○Oblique teeth detection;
○Head surface cracking Teeth thickness detection; ○Diameter tolerance of inner hole; ○Sharpness detection of end;○Detection for solder joint or not and the number; ○Head roundness measurement;
○Solder joint area detection; ○Step tolerance detection of each part; ○Shape detection of plum blossoms;○Head thickness tolerance detection;○ Teeth or not; ○Detection of tooth length tolerance;○Pinhole blockage detection; ○Cross pinholes or not;