


HL-05-U07A
双通道涡电流探伤光学影像组合筛选机
Optical image combined screening machine for dual-channel eddy current detection
参数规格
Specifications
裂纹检测精度:深度>0.1mm 宽度0.06mm
Crack detection accuracy: depth>0.1mm width 0.06mm
参数规格
Specifications
本机台外观尺寸(长*宽*高):
约2000mm*1800mm*2200mm
机台重量:约950KG
更换规格:约20分钟
检测范围:
长度:30-80mm 直径;10-80mm
速度最快可达50支/分钟
裂纹检测精度:深度>0.1mm 宽度0.06mm
采用德国涡流主机
电源:交流单项220V 50HZ
功率:约6KW
Product Size(L x W x H):
About 2000mm*1800mm*2200mm
Machine weight: about 950KG
Replacement specification: about 20 min
examination range:
Length: 30-80mm diameter; 10-80mm
The fastest speed:50 / min
Crack detection accuracy: depth >0.1mm width 0.06mm
German eddy current host
Power: AC single 220V 50HZ
Power: about 6KW
可检测项目
Suitable for
表面划伤、淬火开裂检测(涡流检测)
○螺纹直径公差检测;○最大/最小对边公差检测;
○螺纹牙底径检测;○螺纹牙中径检测;○牙距检测;
○有无螺纹检测;○斜牙检测;○粗细牙检测;
○头部有无电镀检测;○头部真圆度测量;○内孔直径公差;
○搓牙有无到位检测;○各部位台阶公差检测;
○头部厚度公差检测;○总长度公差检测;○侧面开裂检测;
Surface scratching, quenching crack detection (eddy current testing)
○Thread diameter tolerance detection;○ Maximum / minimum alignment tolerance detection;○Threaded teeth bottom diameter detection; ○Threaded teeth median diameter detection; ○Distance detection between teeth;
○Thread or not; ○Oblique teeth detection;○ Teeth thickness detection;
○Electroplating detection or not on head; ○Head roundness measurement; ○Diameter tolerance of inner hole;○Detection for rub teeth in place or not;○ Step tolerance detection of each part;○Head thickness tolerance detection; ○Total length tolerance detection; Side cracking detection;