

※ 发明专利产品
HL-05-GS20
悬挂式钢丝型光学影像筛选机
Optical image screening machine for hanging steel wire
参数规格Specifications
机台外观尺寸(长*宽*高):
约2000mm*1000mm*2200mm
机台重量:约450KG
更换规格:约5分钟
检测范围:
长度:5-30MM
直径:1.5-5mm
可装3支CCD
速度最快可达1000支/分钟
电源:交流单项220V 50HZ
功率:约3KW
Size of machine (L x W x H):
About 2000mm*1000mm*2200mm
Machine weight: about 450KG
Replacement specifications: about 5 minutes
examination range:
Length: 5-30MM
Diameter: 1.5-5mm
Can carry 3 CCD
The fastest speed:1000 / min
Power: AC single 220V 50HZ
Power: about 3KW
可检测项目Suitable for
○螺纹直径公差检测;○头部最大/最小对边公差检测;
○最大/最小对角公差检测;○螺纹牙中径检测;
○内孔与外圆同心度检测;○牙距检测;○有无螺纹检测;
○头部有无电镀检测;○斜牙检测;
○头部表面开裂(有油件、黑色、侧面开裂除外);
○粗细牙检测;○头部针孔堵塞检测;○尾端尖锐度检测;
○牙数检测;○头部真圆度测量;○有无十字针孔 ;
○各部位台阶公差检测;○头部厚度公差检测;○Thread diameter tolerance detection; ○Maximum/minimum alignment tolerance detection on head ;
○Maximum/minimum diagonal tolerance detection; ○Thread middle diameter detection;
○Concentricity detection of inner hole and outer circle; ○Distance detection of teeth; Thread or not;○Electroplating on head or not; ○Oblique teeth detection;○Surface cracking on head (except for with oil parts, black, side cracking);
○Teeth thickness detection; ○Pinhole blockage detection on head;○ Sharpness detection of end;○Teeth number detection; ○Head roundness measurement;○ Cross pinholes or not;○Step tolerance detection of each part; ○Head thickness tolerance detection;